Bedding In
Recommended on-vehicle bedding in
Procedure for racing brake pads and discs
1
Breaking inOut lap
10 stops with mid pressure / low temperature from 150 km/h (90 mph) to approximately 80 km/h (50 mph).
2
Heating upFast lap(Race speed)
A sequence of 5 stops with medium to high pressure from 180 km/h (110 mph) to approximately 60 km/h (40 mph) with maximum acceleration between the stops.
3
Recovery stopsIn lap
3 to 5 stops with mid pressure from 150 km/h (90 mph) to approximately 80 km/h (50 mph).
ATTENTION
Try to avoid installing a new disc and a new brake pad at the same time. Please replace only one component at a time.
Try to avoid installing a new disc and a new brake pad at the same time. Please replace only one component at a time.
If the brake disc has been used before, please make sure that the brake pad compound is compatible with the friction layer on the disc.
For any questions please contact us or your dealer.
For any questions please contact us or your dealer.